Barron Barnett - Electrical Engineer

Resume

Education

2004-2008: Washington State University - B.S. Electrical Engineering
•  Relevant Course Work: Embedded Systems, Microprocessor Design, Advanced Digital Logic Circuits, Control Systems, Advanced Microprocessor Design, ASIC Design, Digital Communications

Senior Design Project: Digital image processing. August 2006 – December 2006
•  Tasked with creating a VHDL convolution engine for images, and create a utility framework for MicroBlaze.
•  Project leader responsible organization and project goals; responsible for keeping the project on track.
•  Core responsibility was writing the firmware drivers for MicroBlaze and creating the tests for our logic.

2002-2004: University of Washington
•  Pre-engineering

Professional Experience

Embedded Systems Intern – Schweitzer Engineering Labs , Pullman, WA | May, 2006 – Present
•  Recommended hardware changes for an embedded prototype to meet the system requirements.
•  Designed and wrote firmware for a proof of concept system. The proof of concept was well received and became a production product.
•  Wrote firmware and recommended design options for solving a complex problem using minimal resources in a microcontroller.
•  Performed relay hardware and firmware upgrades configuring them to spec when needed.
•  Performed a market study for a possible future hardware enhancement. This compared costs of in house versus outside production.
•  Maintained a backend network of communication devices at remote locations. In the event of failure I communicated with people onsite to fix the issue.

Computer Engineer – Engineering Teaching and Research Labs, Pullman, WA | January, 2006 – April, 2006
•  Modified the existing controller hardware to work with the new hardware being installed and verifying its operation. Also altered portions of the controller hardware for better resolution and control.
•  Modified the existing LabView application to match the hardware changes and work correctly.
•  Implemented safety measures into the program including an emergency shutdown that would minimize risk to those around.
•  Using VHDL and MicroBlaze a control system was developed to simplify the use of the stepper motors.
•  Documented the configuration of the system, and the procedures for its use.

FPGA Development Intern – Digilent, Pullman, WA | June, 2004 – April, 2006
•  Created demonstration materials for tradeshows as well as reference designs to be used by other engineers and students. The ranged from VHDL hardware drivers to robots.
•  Wrote VHDL cores and software drivers for hardware so that it would work with Xilinx's EDK.

Software Intern – Sharp SMA, Vancouver, WA | July, 2002 – August, 2002
•  Did final offsite code review to assure conformance to Sharp standards. Wrote utilities to perform more of the basic code standards.
•  Performed a unit test to assure quality.

Network Administrator – Auburn Senior High School, Auburn, WA, | September, 1999 – June, 2001
•  Maintained a Windows NT domain, and provided technical support to clients running Windows 98. This included email configuration, hardware troubleshooting, as well as network configuration and maintenance.

Personal Experience:

Logic Analyzer and Oscilloscope: December 2005
•  Wrote a VHDL ram, parallel communications, and ADC controllers, as well as a state machine to link all the components.
•  Wrote a simple program in Visual C# to get the data from the board using the Digilent communication library. It provided a sample rate, and specifies the channel for trigger. After the data is collected the FPGA sends it back to the PC in a single large chunk.

Linux Projects: January 1998 – Present
•  Built a custom firewalls and created a script to easily duplicate the IPTables rules and allow for modifications to customize the firewall to its end use.
•  Created a central file storage solution. Implemented RAID 5 to provided redundancy as well as massive storage. Serves NFS, NIS, and Samba shares to the rest of my network.
•  Implemented Asterisk on extra computer to provide VoIP. Tied together two different VoIP networks and provide a single access point for family. Currently working on implementing IAX for a direct dial to family friends running Asterisk.

Awards and Certifications:

•  Eagle Scout. (2001)
•  Cisco Certified Network Associate course completion. (2001)
•  PADI Rescue Diver (2001)

Contact Me | ©2008 Barron Barnett